Polyacrylamide flocculant can also be used in the paint production. The anionic flocculant used as the paint thickening agent has the special performance, which can change the fluid dynamics properties of the paint. It can help to increase the viscosity between the molecules, and to make the paint system maintain the uniform and stable state of suspension, or the opaque stand, or the gel formation. Generally speaking, the spraying paint needs more smooth liquidity, in order to form the long wave effect, as it is called, which can make the coating be more uniform. Therefore, the spraying paint needs to add a kind of low viscosity thinner or to add a type of leveling promoter to meet this painting requirement, the introduction of the additives can make the paint more symmetrical and more convenient to use, but at the same time, will not change the original properties of the paint itself.
|INDEX|| APAM|| CPAM|| NPAM|
|Appearance|| White powder / Granular|
|Degree of Hydrolysis|| 6-70%|| 5-80%|| 7% max|
|Solid Content|| 89% min|| 89% min|| 89% min|
|Dissolving Time|| 60 minutes max|
|Effective pH Range|| 5~14|| 7~14|| 1~8|
|Residual Monomer|| 0.1% max|
1. Oil field exploration and development, geology, water conservancy, Coal exploration.
2. Used for drinking water purification, water purification, municipal sewage sludge, municipal solid waste and industrial effluent;
3. Paper-making industry for the clarification of liquid caustic soda, fiber dispersing agent, can improve the beating, the filler retention agents, paper strengthening agent, can be used to improve the treatment rate and the white water recovery;
4. Used in textile, carpet industry, sizing, quick-setting cement, synthetic resin coating. Photosensitive polymers, adhesives, dispersing agent, as well as agricultural soil gel, slurry stabilizers, soil amendments;
5. The sugar syrup for the industry to clarify the agent;
6. Can be used as aquaculture feed additives and adhesives;
7. Oil field water treatment to deal with the recovery of oil.
1. Easy to dissolve.
2. It is with high performance and it can adapt to a variety of conditions.
3. The dose is small and high efficiency.
4. High molecular.
5. High purity.
1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.
2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 60 °C).
3. The most economical dosage can be determined based on a preliminary test. The pH value of the water to be treated should be adjusted before the treatment.
Package and Storage:
25KG white nylon bags/woven/paper bags with pallets;
Keep in dry place,avoid heat & humidity; valid storage time: 2 years.